toilet removal step by step

How To Take Out A Toilet

Taking out a toilet may seem like a daunting task, but with the right knowledge and tools, it can be a straightforward process. From shutting off the water supply to disconnecting the water supply line, removing the toilet tank, and unbolting the toilet from the floor, each step plays an integral role in successfully removing the toilet. However, there are other considerations to keep in mind, such as cleaning up the floor and flange, sanding and painting behind the toilet if desired, and knowing when to call a professional for assistance. Additionally, the question of how to dispose of old toilets may arise. In this discussion, we will explore each step in detail, providing you with the necessary information and guidance to carry out this task efficiently and effectively.

Key Takeaways

  • Locate and shut off the water supply valve before removing the toilet
  • Flush the toilet multiple times to empty the tank and bowl before removal
  • Carefully remove the toilet tank to gain access to the bolts and prepare for bowl removal
  • Disconnect the toilet from the floor by removing the nuts from the floor bolts and scraping off old wax from the flange

Shut off the Water Supply

To begin the process of taking out a toilet, the first step is to shut off the water supply by turning the shut-off valve behind the toilet or on the floor. This crucial step ensures that water flow to the toilet is cut off, preventing any potential leaks or water damage during the removal process. By shutting off the water supply, you can proceed with removing the toilet without any worries of water spilling out.

When shutting off the water supply, it is important to locate the shut-off valve, which is typically located behind the toilet or on the floor nearby. Turning the valve clockwise will shut off the water flow. Once the valve is closed, you can proceed with removing the toilet.

By shutting off the water supply, you are effectively cutting off the water flow to the toilet's supply line. This means that no more water will enter the tank or flow into the bowl. It is also recommended to flush the toilet multiple times before shutting off the water supply to empty the tank and bowl as much as possible.

After shutting off the water supply, it is important to disconnect the toilet's supply line from the shut-off valve and the toilet tank. This can be done by unscrewing the connector nuts with an adjustable wrench. Be prepared to collect any draining water using a bucket or towel.

Flush the Toilet

Before removing a toilet, it is important to flush it multiple times to ensure that the tank and bowl are emptied of water. After flushing, use a sponge to dry any excess water from the tank and bowl. This step is crucial in preventing water leakage during the removal process.

Properly Shut off Water

Turning off the water supply and flushing the toilet multiple times are essential steps in properly shutting off the water before removing a toilet. To begin, locate the shut-off valve behind the toilet or on the floor and turn it off. This will stop the water flow to the toilet. Next, flush the toilet several times to ensure that the tank and bowl are completely emptied. To prevent any spills during removal, use a sponge to dry any excess water from the tank and bowl. Then, disconnect the toilet connector tube at both the shut-off valve and the toilet tank to ensure that the water supply line is fully shut off. By following these steps, you will be properly shutting off the water before removing the toilet, ensuring a smooth toilet installation process.

Remove Toilet Tank

When removing a toilet, the first step is to carefully lift the tank off the bowl after removing the nuts from the mounting bolts. To do this, start by turning off the water supply at the shut-off valve and flushing the toilet multiple times to empty the tank and bowl. Then, use a ratchet wrench or a basin wrench to remove the nuts from the mounting bolts. Once the nuts are removed, you can lift the tank off the bowl and place it on a towel out of the way. This will allow you to have better access to the old bolts and prepare for the removal of the toilet bowl itself. Take your time and be gentle to avoid any damage to the tank or the surrounding area.

Disconnect Toilet From Floor

To disconnect the toilet from the floor and begin the removal process, start by turning off the water supply at the shut-off valve and flushing the toilet multiple times to empty the tank and bowl. After the water has been emptied, it's time to disconnect the toilet from the floor. First, remove the trim caps on the floor bolts and use an adjustable wrench to remove the nuts from the floor bolts. Once the nuts are removed, the toilet bowl can be lifted off the floor. To do this, straddle the toilet and gently rock it side to side to break the seal. Then, lay the bowl on its side on a towel. Before proceeding, remove the old wax from the toilet flange and the bottom of the toilet using a paint scraper. This will ensure a clean and proper installation when the new toilet is installed.

Disconnect the Water Supply Line

To disconnect the water supply line, begin by turning off the water supply at the shut-off valve located either behind the toilet or on the floor behind it. This step is crucial to ensure a smooth and mess-free removal process. By cutting off the water supply, you prevent any potential leaks or spills that could occur during the disconnection.

Once you have turned off the water supply, it's essential to have a bucket or towel handy to collect any draining water. This will help keep the area clean and dry as you proceed with disconnecting the toilet connector tube at the shut-off valve. Be sure to use channel lock pliers, if necessary, to loosen and remove the connector. This tool provides a secure grip, making the disconnection process easier and more efficient.

Next, move to the toilet tank and disconnect the toilet connector tube. This completes the disconnection of the water supply line. As you remove the tube, take care to avoid any spills or drips by having a drop cloth in place. This protective barrier will catch any water that may still be in the tube or tank, preventing any mess from spreading.

When removing the water supply line, it's important to be thorough and ensure that it is completely disconnected. This will prevent any water leakage or damage when the toilet is removed. By following these steps and taking the necessary precautions, you can successfully disconnect the water supply line and proceed with the removal of the toilet.

Remove the Toilet Tank

The first step in removing the toilet tank is to use a ratchet wrench or basin wrench to loosen and remove the nuts from the mounting bolts. These bolts are what hold the tank securely onto the bowl. Liberating the tank from the bowl is essential in order to proceed with the removal process.

Once the nuts have been loosened and removed, carefully lift the tank off the bowl. It is recommended to place the tank on a towel, ensuring it is out of the way and protected from any potential damage. With the tank removed, the focus can then shift towards removing the toilet bowl itself.

To remove the toilet bowl, start by prying off the trim caps on the floor bolts. Then, use an adjustable wrench to remove the nuts from the floor bolts. With the nuts removed, the toilet bowl can be lifted off the floor. It may be necessary to gently rock the toilet from side to side to break the seal before lifting it off.

With the toilet bowl removed, it is important to scrape away the old wax from the toilet flange and the bottom of the toilet. A utility knife or paint scraper can be used for this task. Once the old wax is removed, thoroughly clean the flange and horn with a stiff wire brush to ensure a clean and proper seal when reinstalling the toilet.

Unbolt the Toilet From the Floor

Using an adjustable wrench or by hand, carefully remove the nuts from the floor bolts to unbolt the toilet from the floor. This step is crucial in the process of removing a toilet and liberating your space. Start by locating and prying off the trim caps covering the floor bolts. If they are stubborn, a screwdriver may be necessary to assist in their removal. Once the caps are removed, use an adjustable wrench or your hands to unscrew the nuts from the floor bolts. If the nuts prove to be resistant, try spraying them with a penetrating oil to loosen them up. Alternatively, you can use a hacksaw or nut splitter for a more forceful approach. With the nuts removed, the toilet bowl can now be lifted and taken out from the floor.

It is important to take this opportunity to clean and inspect the toilet flange. Look for any signs of damage or wear that may warrant replacement. The flange is a crucial component that connects the toilet to the drainpipe, so it is essential to ensure its integrity. This simple act of unbolting the toilet from the floor is a significant step in the process of removing a toilet. By following these instructions, you are one step closer to achieving the freedom and liberation of your space. Stay tuned for the next article section, where we will discuss the next steps in taking out a toilet.

Break the Seal Between the Toilet and Floor

To successfully remove a toilet, it is crucial to break the seal between the toilet and the floor. This can be achieved by straddling the toilet and gently rocking it from side to side. By doing so, the seal will be loosened, allowing for the subsequent steps of unbolt the toilet from the floor, remove the wax ring, and lift the toilet off.

Loosen Toilet Bolts

To break the seal between the toilet and the floor, start by locating the plastic caps covering the bolts at the base of the toilet and removing them to expose the bolts. These bolts hold the toilet securely in place, and loosening them is the first step towards liberating your toilet. Grab an adjustable wrench and use it to remove the nuts from the floor bolts. Make sure to loosen them completely, allowing the toilet to move freely. Now, gently rock the toilet back and forth to break the seal between the toilet and the floor. This will help to release any adhesive or caulk holding the toilet in place. Once the seal is broken, you can proceed to remove the toilet from its position.

Remove Wax Ring

To break the seal between the toilet and the floor, start by scraping away the old wax from the toilet flange and the bottom of the toilet using a putty knife. This step is crucial in removing the toilet and preparing for a new installation. Liberating your bathroom from the old and worn-out wax ring is a necessary part of the process. After removing the wax, inspect the toilet flange for any damage or if it needs replacement. Dispose of the old wax into a bucket lined with a plastic bag, ensuring cleanliness and easy cleanup. Once the wax ring is removed, you can proceed to the next step of cutting the caulk and removing the caps. Remember to have a new wax ring and plastic caps ready for the reinstallation process.

Lift Toilet Off

After successfully removing the wax ring, the next step in removing the toilet is to break the seal between the toilet and the floor by lifting it off. To liberate yourself from the old toilet, straddle it and gently rock it side to side to break the seal with the floor. If necessary, enlist the help of a partner to lift the toilet bowl and lay it on its side on a towel. Take caution to avoid damaging the flooring during this process. Once the toilet is lifted off, inspect the seal and flange for any damage or issues. Before disposing of the old toilet, be sure to clean the area where it was previously installed. Proper waste management is essential when removing and disposing of a toilet.

Remove the Old Wax Ring

Carefully scrape away the old wax from both the toilet flange and the bottom of the toilet using a paint scraper. Removing the old wax ring is a crucial step in the process of removing an old toilet. By removing the old wax ring, you ensure a clean and effective seal when installing a new toilet.

To begin, take the paint scraper and gently scrape away the old wax from the toilet flange. The flange is the metal or plastic ring that connects the toilet to the sewer pipe. Make sure to remove all remnants of the old wax to ensure a proper seal with the new wax ring.

Next, scrape away the old wax from the bottom of the toilet. This is where the wax ring is located and is essential for creating a watertight seal. Use the paint scraper to carefully remove any wax residue, ensuring a clean surface for the new wax ring.

Once the old wax has been removed, clean the flange and horn with a stiff wire brush. This will help remove any dirt or debris that may have accumulated over time. Inspect the toilet flange for any damage or if it needs replacement. It is crucial to have a solid and intact flange for a secure installation.

Dispose of the old wax into a bucket lined with a plastic bag. Properly disposing of the old wax ensures a clean and hygienic removal process. Remember to follow local regulations for the disposal of household waste.

With the old wax ring removed and the flange cleaned, you are now ready to learn how to remove a toilet.

Cover the Drain Hole and Dispose of the Old Toilet

To ensure safety and prevent unpleasant odors, it is important to cover the drain hole with a rag or towel after removing the old toilet. Additionally, proper disposal of the old toilet is crucial. This can be done by scraping off the old wax ring, cleaning the toilet flange, and contacting appropriate waste management authorities or scheduling a pickup service to dispose of the toilet responsibly.

Drain Hole Covering

To prevent debris from entering the plumbing system, it is necessary to cover the drain hole when removing the old toilet. This step is crucial as it ensures that no foreign objects or materials find their way into the pipes, potentially causing blockages or damage. Before removing the old toilet, make sure to thoroughly clean the area around the drain hole to provide a clean and secure surface for the new installation. Once the old toilet is removed, carefully cover the drain hole with a suitable covering, such as a plastic bag or tape, to seal it off effectively. This will help maintain the integrity of the plumbing system and prevent any foul odors or gases from escaping. Remember, proper drain hole covering is essential for a successful and trouble-free toilet removal and installation process.

Old Toilet Disposal

When disposing of the old toilet, it is important to cover the drain hole with a plastic bag or tape to prevent sewer gases from entering the house. This step ensures a safe and odor-free removal process. To dispose of the old toilet, lift it carefully, making sure to contain any remaining water. Transport the toilet to the designated disposal area with caution. Local regulations and guidelines should be followed when disposing of the old wax ring and any debris from the removed toilet. After removing the old toilet, it is essential to clean the flange and surrounding area thoroughly to prepare for the installation of a new one. If the old toilet is in good condition, consider donating it to junkyards or upcycling stores. Alternatively, you can schedule a large item pickup service for proper disposal.

Clean up the Floor and Flange

After removing the toilet, the next step is to clean up the floor and flange. This is an essential part of the process to ensure a clean and proper installation of a new toilet. To begin, you will need a putty knife and an old rag to scrape away any old wax from the toilet flange and the bottom of the toilet. Gently but firmly, use the putty knife to remove the wax, being careful not to damage the flange or the toilet.

Once the bulk of the wax has been removed, it is important to thoroughly clean the flange and horn. Use a stiff wire brush to scrub away any residual wax and debris. This will ensure that the new toilet can be securely attached to the flange without any obstructions. While cleaning, take the opportunity to inspect the toilet flange for any damage or signs of wear. If necessary, replace the flange before proceeding.

Proper disposal of the old wax is crucial to avoid any mess. Line a bucket with a plastic bag and carefully deposit the old wax into it. This will prevent any wax from sticking to the bucket and make it easier to dispose of it later. Remember to follow local regulations for the disposal of waste materials.

Optional: Sand and Paint Behind the Toilet

Consider enhancing the overall appearance of your bathroom by sanding and painting behind the toilet, if desired. While not a necessary step in the process of removing and installing a new toilet, sanding and painting behind the toilet can provide a finished look to the area and update the aesthetics of your bathroom.

Once you have removed the toilet and disconnected the water line, take the opportunity to examine the wall behind it. Over time, this area may have accumulated dirt, grime, or even water stains. Sanding the wall will help create a smooth surface for painting and ensure a polished final result.

Before you begin sanding, gather the necessary materials including sandpaper, a sanding block, and a dust mask to protect yourself from any dust particles. Start by lightly sanding the wall in a circular motion, focusing on any rough or uneven areas. Be careful not to apply too much pressure, as this could damage the wall.

Once the wall has been sanded, wipe away any dust using a clean cloth or sponge. This will ensure a clean surface for painting. Choose a paint color that complements the rest of your bathroom and apply it to the wall using a roller or brush. Allow the paint to dry completely before reinstalling the toilet.

When to Call a Professional

If you are inexperienced with plumbing or concerned about potential water damage or injury, it is advisable to seek the assistance of a professional for toilet removal. While removing a toilet may seem like a straightforward task, there are certain situations where calling a professional is the best course of action.

First and foremost, if you are planning on installing a new toilet, it is recommended to call a professional to remove the old one. They have the necessary skills and expertise to ensure the removal is done correctly and without causing any damage to the surrounding area. Additionally, professionals are equipped with the right tools and knowledge to dispose of the old toilet safely and in accordance with local regulations.

Another crucial factor to consider is your level of experience with plumbing. If you have little to no knowledge in this area, attempting to remove a toilet on your own can lead to costly mistakes or even personal injury. Professionals, on the other hand, have the training and experience to handle the job efficiently and safely.

Furthermore, hiring a professional plumber or contractor for toilet removal provides peace of mind. They understand the intricacies of the plumbing system and can identify any potential issues that may arise during the removal process. This ensures that the task is completed smoothly, without any unexpected complications.

How to Dispose of Old Toilets

Properly disposing of old toilets is essential to prevent environmental harm and comply with local regulations and guidelines. When it comes time to remove and dispose of an old toilet, there are a few options to consider.

First and foremost, if your old toilet is in good condition, you may want to explore the possibility of donating it. Many junkyards or upcycling stores accept used toilets that are still usable. By donating your old toilet, you can give it a second life and contribute to a more sustainable future.

If donation is not an option, you can consult your local public works centers or waste management companies for guidance on proper disposal methods. They may provide specific instructions or recommend nearby facilities that accept old toilets for disposal.

Another option to explore is scheduling a large item pickup service if it is available in your area. Many waste management companies offer this service, allowing you to have your old toilet picked up and disposed of properly. This can be a convenient and hassle-free way to get rid of your old toilet.

It is important to note that improper disposal methods, such as illegal dumping or throwing the toilet in the regular trash, can have serious consequences for the environment. To protect our planet, it is crucial to follow local regulations and dispose of old toilets responsibly.

Frequently Asked Questions

Are Toilets Easy to Remove?

Toilets can generally be removed with relative ease, provided the necessary steps are followed. These steps include disconnecting the toilet connector and turning off the water supply, removing the tank from the bowl, unbolt the toilet from the floor, break the seal, and remove the old wax ring. While the process may require some physical effort and a basic understanding of plumbing, it can be accomplished by most individuals with the right tools and instructions.

How Do You Remove a Toilet Easily?

Removing a toilet can be a relatively straightforward process if the proper steps are followed. First, the water supply must be turned off and the toilet connector tube disconnected. Next, the toilet tank is removed by unscrewing the mounting bolts. The toilet bowl is then unfastened from the floor by removing the nuts from the floor bolts. To break the seal, the toilet is gently rocked and lifted with the assistance of a partner if necessary. Finally, the old wax ring is scraped away and the flange cleaned before disposal.

Can You Remove a Toilet From a House?

Yes, it is possible to remove a toilet from a house. Removing a toilet involves turning off the water supply, disconnecting the toilet connector tube, and removing the tank and bowl. It is important to carefully follow the steps to avoid any damage or leaks. By properly removing a toilet, you can create a sense of liberation and freedom, allowing for repairs or renovations to be made to the bathroom.

How Do You Drain a Toilet so You Can Remove It?

To drain a toilet, it is necessary to turn off the water supply valve located behind the toilet. Once the water is shut off, flush the toilet to remove as much water as possible from the bowl and tank. Next, use a sponge or towel to soak up any remaining water. Disconnect the water supply line and unscrew the bolts securing the toilet to the floor. Carefully lift the toilet and set it aside to complete the removal process.

Conclusion

In conclusion, removing a toilet is a straightforward process that involves shutting off the water supply, disconnecting the water supply line, removing the toilet tank, and unbolt the toilet from the floor. Cleaning up and disposing of the old toilet are also important steps. Remember, if unsure or uncomfortable with the process, it is best to call a professional for assistance. Take time to tackle this task to transform your bathroom.